Part J — Host config, license, updates, logs
J.1 Host config — /config
Installed settings (read-only)
Hostname · Address · Gateway · DNS · Physical NIC(s) · Management bridge · Control plane RAM · Control plane RAM share · Install disk · Control plane disk · Control plane disk share · Data partition.
Editable sections
| Section | Fields / buttons | Notes |
|---|---|---|
| Hostname | Hostname → Save hostname | Does not change management IP |
| Management address | Address, Gateway → Save host configuration | Careful: you may lose the session |
| DNS servers | Rows + Add a DNS server | — |
| Static names | Address + Name → Save / Remove | Local name overrides |
| Host clock | Time zone · Sync with NTP / Set manually · NTP server · Date and time → Update time | VMs keep running |
| Physical server | Reboot physical server · Shut down physical server | Host power |
| Factory reset | Type RESET → Factory reset | See below |
Factory reset
UI summary: Removes every virtual machine and clears hypervisor config. Attached datastores are unmounted and removed from the list only — disks are not formatted. Management address, hostname, license, serial, and the admin account stay.
Confirm: Factory reset this host? Every virtual machine is removed. Attached storage is unmounted and its config is cleared. Disks are not formatted.
J.2 License — /license
Lead: A standalone license limits virtual machines on this server. A datacenter license limits virtual machines and joined hosts across the cluster.
| Display | Meaning |
|---|---|
| Serial · State · Type | License binding |
| Registered account · Expires | Entitlement |
| VMs used of total | Consumption |
| Cluster hosts | Datacenter license scope |
| Control | Meaning |
|---|---|
| License file | Upload encrypted license (tied to serial MD5) |
| Upload license | Apply |
J.3 Updates — /update
Lead: Check update.toorce.com with this host serial, then install every published hypervisor package.
| Button | Action |
|---|---|
| Check updates | Contact update service (serial authorized) |
| Install updates | Install published packages in order |
| Clear and reinstall | Forced reinstall path when offered |
Package pills show Not installed / Installed / Available.
J.4 Logs — /logs
| Area | Controls |
|---|---|
| Task log | Live task history |
| Remote syslog | Enable · Server · Port · Protocol (UDP/TCP) · Facility · Tag · VM status interval · Send notifications · Send VM status → Save · Send test message · Send VM status now |